Apprenticeship Programs

Associate of Applied Science Degree

• Electrical Apprenticeship Option
• Machinist Apprenticeship Option

Certificate of Completion

• Electrical Apprenticeship Option
• Machinist Apprenticeship Option

Electrical Lineworker Certificate

(575) 527-7591

Information based on the 2009-10 DACC Catalog

Apprenticeship programs provide training through a combination of learning experiences, both on the job and in the classroom. These programs are approved by the State Apprenticeship Council and the U.S. Department of Labor. Apprentices typically spend at least 2000 hours per year learning on the job as paid employees of a sponsoring organization, and a minimum of 144 hours per year in related classroom instruction. The term of an apprenticeship depends on the job being learned. For most highly skilled crafts, such as electrician, plumber, or machinist, it is four years. Once an apprentice has completed the program and passed the appropriate examinations, (s)he is considered a journeyperson.

DACC provides the related classroom instruction for the above apprenticeship programs, sponsored by businesses and organizations in the community.

Electrical Lineworker Option New Mexico electric cooperatives and private firms that perform electrical line work often find it difficult to fill vacancies. DACC’s Electrical Lineworker Program is a one-year certificate program designed to provide students with the technical background and the manual skills necessary for careers in the installation and maintenance of electrical power cables.

As part of the required curriculum, students will be required to work as a cooperative education student with a New Mexico electric cooperative or a private firm that performs electrical line work.

Special Admissions Requirements

Apprentices must gain hands-on experience on the job. For this reason, admittance to some classes is limited to students who are registered apprentices.

Additional Graduation Requirements

To receive either an associate degree or a certificate of completion, students are required to obtain a Career Readiness Certificate in the areas of Applied Math, Reading for Information, and Locating Information at the appropriate level for their respective degree option. To facilitate success in obtaining their Career Readiness Certificate students will be required to take between 1 and 3 credits of OETS 102OETS 102: Career Readiness Certification Preparation - 1-3 cr.
This course is designed to prepare students to successfully obtain Career Readiness Certifications in all areas and at the appropriate levels for their program of study. Graded: S/U only. .Students are strongly encouraged to pursue Career Readiness Certifications in other areas that have been identified for their degree option. A program advisor can provide additional information.

---

Associate Degree (66 credits)

NOTE: The check marks ✔ in this section pertain only to the certificate program, described in the next section. Courses appearing in italics are identical to those offered at New Mexico State University Las Cruces (main) Campus.

Core Requirements      13 Credits

OR OR	BOT 209BOT 209: Business and Technical Communications - 3 cr. Effective written communication skills and techniques for career success in the work place. Composition of letters, memos, short reports, forms, and proposals, and technical descriptions and directions. Prerequisites: ENGL 111G and computer keyboarding ability or consent of instructor. – Business and Technical Communications ENGL 203GENGL 203G: Business and Professional Communication - 3 cr. Effective writing for courses and careers in business, law, government, and other professions. Strategies for researching and writing correspondence and reports, with an emphasis on understanding and responding to a variety of communication tasks with a strong purpose, clear organization, and vigorous professional style. – Business and Professional Communication ENGL 218GENGL 218G: Technical and Scientific Communication - 3 cr. Effective writing for courses and careers in sciences, engineering, and agriculture. Strategies for understanding and presenting technical information for various purposes to various audiences. – Technical and Scientific Communication	3
OR	COMM 253GCOMM 253G: Public Speaking - 3 cr. Principles of effective public speaking, with emphasis on preparing and delivering well-organized, logical, and persuasive arguments adapted to different audiences. – Public Speaking COMM 265GCOMM 265G: Principles of Human Communication - 3 cr. Study and practice of interpersonal, small group, and presentational skills essential to effective social, business, and professional interaction. – Principles of Human Communication	3
	ENGL 111GENGL 111G: Rhetoric and Composition - 4 cr. Skills and methods used in writing university-level essays. Prerequisite: ACT standard score in English of 16 or higher during regular semester (20 or above during summer) or successful completion of a developmental writing course or the equivalent. – Rhetoric and Composition	4
OR OR	BMGT 240BMGT 240: Human Relations - 3 cr. Human interactions in business and industrial settings. Motivation and learning experiences as related to problems of the worker and supervisor. Practical applications of human behavior. Prerequisite(s): CCDE 105N or higher or BOT 105 or higher. Restricted to: Community College campuses only. – Human Relations PSY 201GPSY 201G: Introduction to Psychology - 3 cr. (3+3P) Methods and principles of behavior. Topics include human evolution and development, biopsychology, perception, learning, thinking, motivation, social interaction, and the diagnosis and treatment of abnormal behavior. – Introduction to Psychology SOC 101GSOC 101G: Introductory Sociology - 3 cr. Introduction to social theory, research, methods of analysis, contemporary issues in historical and cross-cultural contexts. Covers groups, deviance, inequality, family, gender, social change, and collective behavior. – Introductory Sociology	3

Related Requirements      6-8 Credits

OR	OECS 105OECS 105: Introduction to Microcomputer Technology - 3 cr. History and impact of computers on the economy and society. Development of basic skills in operating systems, word processing, spreadsheets, and databases. – Introduction to Microcomputer Technology OECS 227OECS 227: Computer Applications for Technicians - 3 cr. Computer applications for service technicians in various disciplines. Hardware and software applications explored. Includes operating systems, high level programming, and networking hardware and software. – Computer Applications for Technicians	3
✔	OETS 102OETS 102: Career Readiness Certification Preparation - 1-3 cr. This course is designed to prepare students to successfully obtain Career Readiness Certifications in all areas and at the appropriate levels for their program of study. Graded: S/U only. – Career Readiness Certification Preparation	1-3
	Approved elective	2

Technical Requirements      48 Credits

	Choose one of the following three options:
	ASSOCIATE DEGREE OPTION: ELECTRICAL APPRENTICESHIP
✔	OEET 151OEET 151: Electrical Apprenticeship I - 6 cr. Apprenticeship responsibilities and benefits as well as first aid and CPR will be covered. Hand tools, electrical theory, and the regulations imposed by national codes and OSHA. Students will apply theory taught in their jobs. Prerequisite: consent of instructor. – Electrical Apprenticeship I	6
✔	OEET 152OEET 152: Electrical Apprenticeship II - 6 cr. OHM s law circuit sizing and service panel sizing will be covered in detail. Other topics include low voltage systems, heating and air conditioning circuits, alarm systems and smoke detectors. Prerequisites: OEET 151 and consent of instructor. – Electrical Apprenticeship II	6
✔	OEET 153OEET 153: Electrical Apprenticeship III - 6 cr. Various electrical measuring devices will be covered in detail. Inductance, transformers, capacitance, and simple motors will be studied. Prerequisites: OEET 152 and consent of instructor. – Electrical Apprenticeship III	6
✔	OEET 154OEET 154: Electrical Apprenticeship IV - 6 cr. Theory and application of three-phase transformers and autotransformers. Electrical distribution using switchboards, panelboards, and circuit breakers. Prerequisites: OEET 153 and consent of instructor. – Electrical Apprenticeship IV	6
✔	OEET 251OEET 251: Electrical Apprenticeship V - 6 cr. Commercial/industrial applications for electricians. Blueprint interpretation, commercial construction types and processes, wiring methods, wiring materials, and motor controls. Prerequisites: OEET 154 and consent of instructor. – Electrical Apprenticeship V	6
✔	OEET 252OEET 252: Electrical Apprenticeship VI - 6 cr. In-depth commercial applications to include commercial/industrial service calculations, mobile home parks, multi-family dwellings, and commercial fire/security systems. Prerequisites: OEET 251 and consent of instructor. – Electrical Apprenticeship VI	6
✔	OEET 253OEET 253: Electrical Apprenticeship VII - 6 cr. Control devices in commercial/industrial applications; emphasis on logic in-line diagrams, time delay starters, reversing starters, and manual/magnetic solenoids. Prerequisites: OEET 252 and consent of instructor. – Electrical Apprenticeship VII	6
✔	OEET 254OEET 254: Electrical Apprenticeship VIII - 6 cr. Miscellaneous topics for the journeyperson electrician to include power distribution/transmission, solid state controls and relays, photoelectric and proximity controls and programmable controllers. Prerequisites: OEET 253 and consent of instructor. – Electrical Apprenticeship VIII	6
	ASSOCIATE DEGREE OPTION: MACHINIST APPRENTICESHIP
✔	OETS 118OETS 118: Mathematics for Technicians - 3 cr. (2+2P) Analysis and problem solving of technical problems using measuring instruments and techniques of arithmetic, algebra, geometry, and trigonometry. Prerequisite: CCDM 104N or appropriate placement test score. – Mathematics for Technicians	3
✔	OEMG 115OEMG 115: Print Reading for Industry - 3 cr. (2+2P) Reading, interpretation, and revisions of industrial technical drawings common to manufacturing, Aerospace, machine parts, electrical, hydraulic, and Pneumatic drawings. Interpretation of engineering drawings and related shop calculations. Introduction to computer-aided drawing of schematic diagrams. Restricted to: Community College campuses only. – Print Reading for Industry	3
✔	OEMG 151OEMG 151: Introduction to Metalworking I - 3 cr. (4+2P) Measuring instruments, including steel rules, combination and transfer tools, micrometers, vernier instruments, bevel instruments, and indicators. Shop safety and first aid, introduction to cutting fluids, saws and sawing, and drill presses. Prerequisite: OETS 118 or concurrent enrollment. – Introduction to Metalworking I	3
✔	OEMG 152OEMG 152: Introduction to Metalworking II - 3 cr. (4+2P) Gage blocks and sine bars, cutting and noncutting hand tools, engine lathes, grinding machines, and concepts of numerical control. Prerequisites: OEMG 115, OEMG 151, and OETS 118. – Introduction to Metalworking II	3
✔	OEMG 153OEMG 153: Basic Machining Technology I - 5 cr. (6+2P) Introduction to EDM, saws and sawing practices, and various lathe operations. Prerequisite: OEMG 152. – Basic Machining Technology I	5
✔	OEMG 154OEMG 154: Basic Machining Technology II - 5 cr. (6+3P) Metallurgy for machinists and computer programming relating to NC and CNC. Prerequisite: OEMG 153. – Basic Machining Technology II	5
	OEMG 205OEMG 205: Statistical Controls for Manufacturing Technicians - 3 cr. (2+2P) Use of hardware and software for quality assurance to include the design of experiments, sampling techniques, SPC, control chart application and development, and process reliability. Prerequisite: OEES 120 or equivalent. – Statistical Controls for Manufacturing Technicians	4
	DRFT 105DRFT 105: Technical Drawing for Industry - 3 cr. (2+2P) Technical sketching, basic CAD, and interpretation of drawings with visualization, speed and accuracy highly emphasized. Areas of focus include various trades such as machine parts, welding, heating and cooling, and general building sketches/plan interpretation. – Technical Drawing for Industry	3
✔	Electives chosen in consultation with advisor	19

Certificate (42-49 credits)

Courses pertaining to the certificate have a check mark (✔). To earn the electrical or machinist apprenticeship certificate, students take the checkmarked (✔) courses under the corresponding option for the associate degree program, along with OETS 102OETS 102: Career Readiness Certification Preparation - 1-3 cr.
This course is designed to prepare students to successfully obtain Career Readiness Certifications in all areas and at the appropriate levels for their program of study. Graded: S/U only..

Electrical Lineworker Certificate Option (30-32 credits)

The Electrical Lineworker Certificate Option has its own separate requirements that are listed here.

NOTE: Students not possessing a commercial drivers license (CDL) will be required to take OEAT 130OEAT 130: Introduction to Transportation Industry - 3 cr.
State and national traffic statutes that relate to the trucking industry. A Commercial Driver's License Learner s Permit will be obtained through successful completion of the course. Prerequisites: Must be 18 years of age, have a current driver's license and consent of instructor., during the spring semester and OEAT 131OEAT 131: Class A CDL - 6 cr. (3+6P)
Instruction in how to perform proper pre-trip inspection; hands-on training with a tractor-trailer unit on the backing range and street driving to develop skills necessary to pass Class A DCL exam. Prerequisites: Class A CDL restricted license (permit) and either restriction of D.O.T. government medical card, and consent of instructor., during the first summer session.

Related Requirements      7-9 Credits

	OECS 155OECS 155: Special Topics - Introductory Computer Technology - 0.5-4 cr. Topics to be announced in the Schedule of Classes. May be repeated up to 8 credits. – Special Topics - Introductory Computer Technology	3
	OETS 102OETS 102: Career Readiness Certification Preparation - 1-3 cr. This course is designed to prepare students to successfully obtain Career Readiness Certifications in all areas and at the appropriate levels for their program of study. Graded: S/U only. – Career Readiness Certification Preparation	1-3
	OETS 118OETS 118: Mathematics for Technicians - 3 cr. (2+2P) Analysis and problem solving of technical problems using measuring instruments and techniques of arithmetic, algebra, geometry, and trigonometry. Prerequisite: CCDM 104N or appropriate placement test score. – Mathematics for Technicians	3

Technical Requirements      23 Credits

	OEET 110OEET 110: Basic Electricity and Electronics - 4 cr. (3+3P) An introduction to electricity theory and practice, including electron theory, Ohm s law, construction of electrical circuits, direct and alternating currents, magnetism, transformers, and practical applications. Same as OEAR 102, OEES 105, OEPB 102. – Basic Electricity and Electronics	4
	OEET 130OEET 130: Introduction to Electrical Power Systems - 2 cr. An overview of electrical power systems, equipment, safety practices, first aid and CPR. Prerequisite: acceptance into the electrical lineworker program. Corequisite: OEET 110 and OEET 131. Restricted to majors. – Introduction to Electrical Power Systems	2
	OEET 131OEET 131: Electrical Lineworker Lab I - 6 cr. (12P) Climbing and work on utility poles using ropes and rigging, pole setting and an introduction to transmission and distribution line construction. Maintenance and troubleshooting to include the use of hot sticks. Prerequisite: acceptance into the electrical lineworker program. Corequisite: OEET 110 and OEET 130. Restricted to majors. – Electrical Lineworker Lab I	5
	OEET 140OEET 140: Electrical Power Systems II - 3 cr. (2+2P) Theory of power generation and distribution with emphasis on three phase systems to include transformers, voltage regulators, surge arrestors. Includes troubleshooting. Prerequisites: acceptance into the electrical lineworker program and OEET 130. Corequisite: OEET 141. Restricted to majors. – Electrical Power Systems II	3
	OEET 141OEET 141: Electrical Lineworker II - 6 cr. (12P) Practice in the installation of electrical power lines including transformers, voltage regulators, and surge arrestors. Also advanced hot sticking procedures, troubleshooting, underground systems procedures, and pole-top rescue. Prerequisites: Acceptance into the lineworker program and OEET 131. Corequisite: OEET 140. Restricted to majors. Community Colleges only. – Electrical Lineworker II	5
	OEET 221OEET 221: Cooperative Experience I - 1-4 cr. Supervised cooperative work program. Student is employed in an approved occupation and is supervised and rated by the employer and instructor. Student will meet in a weekly class. Graded S/U. Prerequisite: consent of instructor. – Cooperative Experience I	4